Free test tool · runs in your browser

Online Speaker & Headphone Test

Check that your left and right channels are the right way round, that your speakers are in phase, and how low and high your system can really play — with bass and full-range sweeps.

verbonest://speaker-test

Loading Speaker Test…

How it works

How to use the Speaker Test tool

  1. 01

    Set a low volume

    Start quiet, especially with headphones.

  2. 02

    Run the channel tests

    Left, Center and Right should play from the matching side.

  3. 03

    Try phase and sweeps

    Compare in-phase vs out-of-phase, then sweep bass and full range.

Features

Why use VerboNest Speaker Test?

Channel identification

Noise bursts on the left, right and both sides with matching visuals.

Phase check

In-phase sounds solid and centred; out-of-phase sounds hollow — if they're reversed, swap a speaker's wires.

Bass sweep

20 → 200 Hz to find your subwoofer's limit and any rattles.

Full sweep

20 Hz to 20 kHz with a live frequency readout.

FAQ

Speaker Test – frequently asked questions

How do I test left and right speakers?

Press Left, then Right. Sound should come only from that side. If it's reversed, your cables or headphones are swapped.

What does the phase test show?

In-phase should sound solid and centred. If Out of phase sounds better, one speaker is wired backwards.

How low should my speakers go?

Small laptop speakers often stop around 100–200 Hz; good bookshelf speakers reach 50 Hz; subwoofers go down to 20–30 Hz.

Is it safe for my speakers?

Yes at moderate volume. Keep the volume low during sweeps, especially at very low and very high frequencies.

More free tools

Related sound tools

See all 42 free tools